ANSI B16.5 Plate Flange
This flange always has two types, one is Plate Flange FF, and the other is SOP Flange (Raised Face).
Additional information
| Item NO | LT-F02A |
|---|---|
| Material | Material of Duplex Stainless Steel: 9041L 2205, 2507, 254SMO, etc, SS304, SS316, SS304L, SS316L, SS321, SS310 ,1.4401, 1.4403 |
| Pressure | 150LB |
| Size | 1/2" to 24" |
Product Details
This flange always has two types, one is Plate Flange FF, and the other is SOP Flange (Raised Face).
Welflow Flanges
- Standard: ANSI B16.5, ASME B16.5
- Type: Plate Flange, SOP Flange (Raised Face)
- Pressure: 150LB
- Size: 1/2″ to 24″
- Process: Forged
ANSI/ASME B16.5 150LB Plate Flange RF
NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
